new product as3pd thru as3pm www.vishay.com vishay general semiconductor revision: 13-jul-11 1 document number: 88837 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 high current density standard avalanche surface mount rectifiers typical applications for use in general purpose re ctification of power supplies, inverters, converters and freewheeling diodes for consumer, automotive and telecommunication. features ? very low profile - typical height of 1.1 mm ? ideal for automated placement ? glass passivated chip junction ? controlled avalanche characteristics ? low leakage current ? high forward surge capability ? aec-q101 qualified ? meets msl level 1, per j-st d-020, lf maximum peak of 260 c ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec ? halogen-free according to iec 61249-2-21 definition mechanical data case: to-277a (smpc) molding compound meets ul 94 v-0 flammability rating base p/n-m3 - halogen-free, rohs compliant, and commercial grade base p/nhm3 - halogen-free, rohs compliant, and automotive grade terminals: matte tin plated leads, solderable per j-std-002 and jesd 22-b102 m3 suffix meets jesd 201 cla ss 1a whisker test, hm3 suffix meets jesd 201 class 2 whisker test notes (1) mounted on 10 mm x 10 mm pad areas, 1 oz. fr4 pcb (2) free air, mounted on re commended copper pad area primary characteristics i f(av) 3.0 a v rrm 200 v to 1000 v i fsm 70 a e as 20 mj v f at i f = 3 a 0.90 v t j max. 175 c to-277a ( s mpc) anode 1 anode 2 cathode k k 2 1 e s mp ? s eries maximum ratings (t a = 25 c unless otherwise noted) parameter symbol as3pd as3pg as3pj as3pk as3pm unit device marking code as3d as3g as3j as3k as3m maximum repetitive pe ak reverse voltage v rrm 200 400 600 800 1000 v maximum dc forward current (fig. 1) i f (1) 3.0 a i f (2) 2.1 peak forward surge curr ent 10 ms single half sine-wave superimposed on rated load i fsm 70 a non-repetitive avalanche energy at t j = 25 c i as = 2.5 a max. e as 20 mj i as = 1.0 a typical 30 operating junction and storage temperature range t j , t stg - 55 to + 175 c
new product as3pd thru as3pm www.vishay.com vishay general semiconductor revision: 13-jul-11 2 document number: 88837 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) pulse test: 300 s pulse width, 1 % duty cycle (2) pulse test: pulse width ? 40 ms notes (1) free air, mounted on recommended pcb 1 oz. pad area; thermal resistance r ? ja - junction to ambient (2) units mounted on pcb with 10 mm x 10 mm copper pad areas, 1 oz. fr4 pcb; r ? jm - junction to mount note (1) aec-q101 qualified electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditi ons symbol typ. max. unit instantaneous forward voltage i f = 1.5 a t a = 25 c v f (1) 0.92 - v i f = 3.0 a 1.00 1.10 i f = 1.5 a t a = 125 c 0.81 - i f = 3.0 a 0.90 0.95 reverse current rated v r t a = 25 c i r (2) 0.28 10 a t a = 125 c 62 150 typical reverse recovery time i f = 0.5 a, i r = 1.0 a, i rr = 0.25 a t rr 1.2 - s typical junction capacitance per diode 4.0 v, 1 mhz c j 37 - pf thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol as3pd as3pg as3pj as3pk as3pm unit typical thermal resistance r ? ja (1) 80 c/w r ? jm (2) 5 ordering information (example) preferred p/n unit weight (g) preferred pa ckage code base quantity delivery mode as3pj-m3/86a 0.10 86a 1500 7" diameter plastic tape and reel as3pj-m3/87a 0.10 87a 6500 13" diamet er plastic tape and reel as3pjhm3/86a (1) 0.10 86a 1500 7" diameter plastic tape and reel as3pjhm3/87a (1) 0.10 87a 6500 13" diameter plastic tape and reel
new product as3pd thru as3pm www.vishay.com vishay general semiconductor revision: 13-jul-11 3 document number: 88837 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ratings and characteristics curves (t a = 25 c unless otherwise noted) fig. 1 - mayimum forward current derating curve fig. 2 - forward power loss characteristics fig. 3 - typical instantaneous forward characteristics fig. 4 - typical reverse leakage characteristics fig. 5 - typical junction capacitance fig. 6 - typical tran sient thermal impedance mount temperature (c) dc forward current (a) 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 0 25 50 75 100 125 150 175 t m = 160 c t a = 25 c t m mea s ured at the cathode band terminal average forward current (a) average po wer lo ss (w) 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 d = t p /t t p t d = 0.1 d = 0.2 d = 0.3 d = 0.5 d = 0.8 d = 1.0 in s tantaneou s forward voltage (v) in s tantaneou s forward current (a) 0.1 1 10 100 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 t a = 125 c t a = 75 c t a = 25 c t a = 175 c percent of rated peak rever s e voltage (%) in s tantaneou s rever s e current (a) 0.01 0.1 1 10 100 1000 10 20 30 40 50 60 70 80 90 100 t a = 125 c t a = 25 c t a = 75 c t a = 175 c rever s e voltage (v) junction capacitance (pf) 1 10 100 1000 0.1 1 10 100 t j = 25 c f = 1.0 mhz v s ig = 50 mv p-p t - pul s e duration ( s ) tran s ient thermal imped ance (c/w) 1 10 100 0.01 0.1 1 10 100 junction to ambient
new product as3pd thru as3pm www.vishay.com vishay general semiconductor revision: 13-jul-11 4 document number: 88837 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package outline dimensions in inches (millimeters) conform to jedec to-277a to-277a ( s mpc) 0.016 (0.40) 0.006 (0.15) 0.047 (1.20) 0.039 (1.00) 0.146 (3.70) 0.134 (3.40) 0.087 (2.20) 0.075 (1.90) 0.189 (4.80) 0.173 (4.40) 0.049 (1.24) 0.037 (0.94) 0.053 (1.35) 0.041 (1.05) 0.030 (0.75) nom. 0.084 (2.13) nom. 0.155 (3.94) nom. mountin g pa d layout 0.268 (6.80) 0.186 (4.72) min. 0.050 (1.27) min. 0.041 (1.04) 0.055 (1.40) min. 0.189 (4.80) min. 0.187 (4.75) 0.175 (4.45) 0.262 (6.65) 0.250 (6.35) 0.242 (6.15) 0.238 (6.05) 0.171 (4.35) 0.167 (4.25) k 2 1
legal disclaimer notice www.vishay.com vishay revision: 12-mar-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products no t expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale , including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding th e design or manufacture of the part. please contact authorized vishay personnel t o obtain written terms and conditions regardin g products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu.
|
